Structural Engineers in Leeds
Structural calculations, drawings and practical engineering support for Leeds homeowners, architects and contractors — from Victorian terraces in Headingley to modern refurbishments around the city centre.
For Leeds terraces and semis, it helps to share: house type/age (if known), the rooms being opened up, and whether there’s a wall above. Photos + a sketch usually gets us started quickly.
We support projects across Leeds — from Leeds City Centre and Holbeck to Headingley, Hyde Park, Kirkstall and Horsforth, plus popular residential areas like Chapel Allerton, Meanwood, Roundhay and Moortown. We also cover outer districts such as Morley, Garforth, Pudsey and Rothwell.
Structural engineering for Leeds homes and small commercial projects
Leeds has a broad mix of housing: Victorian terraces, 1930s semis, post-war estates and modern developments. Typical structural queries include creating open-plan kitchen/living spaces, designing steel beams and bearings, chimney breast alterations, and coordinating extension steelwork with architect layouts.
We keep deliverables practical: clear assumptions, buildable details, and drawings that builders can follow — while keeping Building Regulations compliance front and centre.
1) Internal alterations (open-plan living)
Removing or widening openings in load-bearing walls, specifying steel beams/posts/padstones, and checking bearings and stability.
- Beam sizing + connection notes
- Padstone / bearing checks
- Temporary works guidance (high-level)
2) Extensions & renovations
Rear/side/wraparound extensions, tie-ins to existing houses, and details for steelwork, lintels, and supporting walls.
- Load paths + member sizing
- Opening/lintel design
- Coordination with architect layouts
3) Loft conversions
Dormers, ridge beams, floor upgrades, and trimming around stair openings — keeping headroom and buildability in mind.
- Floor joist / beam design
- Support to existing structure
- Notes for builder sequencing
Local Leeds “project fit” examples (typical)
These are examples of the kind of work we often see across Leeds. If yours is similar, we can usually move quickly.
- Terrace refurb (LS6/LS7/LS8): open-plan kitchen/living with beam + bearing checks.
- 1930s semi extension (LS16/LS17/LS18): rear extension steelwork, lintels and tie-in details.
- Loft conversion (LS15/LS25/LS27): new floor structure, trimming to stairwell, dormer framing.
- Chimney breast alteration (various): support strategy and load transfer checks.
Share your postcode, a few photos, and your plan/sketch, and we’ll tell you what’s needed and the best next step.
Areas we cover in Leeds
Leeds City Centre, Holbeck, Hunslet, Beeston, Armley, Burley, Hyde Park, Headingley, Kirkstall, Horsforth, Chapel Allerton, Meanwood, Moortown, Roundhay, Oakwood, Seacroft, Cross Gates, Garforth, Rothwell, Morley, Pudsey and surrounding districts.
Common postcode districts include: LS1–LS2, LS4–LS6, LS7–LS9, LS14–LS18, LS25, LS27, LS28 (and nearby LS postcodes depending on the project).
Browse all locationsHow the process works
- Quick review of your scope, photos and any drawings.
- Site visit if required (or remote-first where appropriate).
- Design & checks + buildable details.
- Issue pack: calculations + drawings/notes for Building Control.
- Support during build if questions come up.
We’ll clearly state assumptions and limitations, so builders and Building Control have a clean engineering trail.
Leeds FAQs
Can you help if I only have photos and rough dimensions?
Do you work with Building Control and builders?
What do you need from me to price the job accurately?
Do you cover Headingley / Roundhay / Horsforth?
Request a structural engineer in Leeds
Tell us what you’re doing and where (postcode), and we’ll recommend the most efficient route: desktop assessment, measured survey requirements, or a site visit.
Tip: If you’re removing a wall, include which rooms it separates, the opening width, and whether there’s a wall directly above.
